All MIBs › Juniper-ATM-1483-Profile-MIB › juniAtm1483ProfileAutoConfLockoutMax
juniAtm1483ProfileAutoConfLockoutMax
Module: Juniper-ATM-1483-Profile-MIB
OID (symbolic): Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileAutoConfLockoutMax
OID (numeric): 1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: The upper bound, in seconds, of the time range used to specify the duration of the lockout of the encapsulation type from recognition for the specified interface. This value must equal or exceed the value for juniAtm1483ProfileAutoConfLockoutMin. This only takes effect if juniAtm1483ProfileAutoConfEnable is set to enable for the encapsulation type for this interface. The ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type is enabled by default. The initial lockout duration is juniAtm1483ProfileAutoConfLockoutMin and increases exponentially for each failure that occurs for the specified encapsulation type for the specified interface within the greater of 15 minutes and this object's value. The lockout duration for the specified encapsulation type will not exceed this object's value. If the time between creation errors for the specified encapsulation type for the specified interface is greater than the greater of 15 minutes and this object's value, then the lockout duration reverts to juniAtm1483ProfileAutoConfLockoutMin. To disable the ability to lockout the specified encapsulation type from recognition in the event of an error in creating an interface of the encapsulation type for the specified interface, the value of this object and juniAtm1483ProfileAutoConfLockoutMin must be set to 0. It is not recommended that this lockout feature be disabled except for debugging purposes.
What is juniAtm1483ProfileAutoConfLockoutMax?
The ceiling, in seconds (0-86400, default 300, must be at least the Min value), on how long autoconfiguration lockout for a given encapsulation type can grow to after repeated failures. An admin raises this if a persistently failing encapsulation type is retrying too often and generating log noise, or sets it to 0 alongside the Min object only to disable lockout for debugging.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5 snmpwalk -v2c -c public <target> Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileAutoConfLockoutMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5.1 snmpget -v2c -c public <target> Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileAutoConfLockoutMax.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5.1 i <value>
Start monitoring Juniper Networks E-series (JUNOSe) router (ATM RFC 1483/2684 profiles) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-ATM-1483-Profile-MIB::juniAtm1483ProfileAutoConfLockoutMax OID value, configure state conditions and alerts, and monitor any Juniper Networks E-series (JUNOSe) router (ATM RFC 1483/2684 profiles) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.58 | juniAtm1483ProfileMIB | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1 | juniAtm1483ProfileObjects | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1 | juniAtm1483Profile | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.2 | juniAtm1483ProfileAutoConfTable | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.2.1 | juniAtm1483ProfileAutoConfEntry | Juniper-ATM-1483-Profile-MIB |
| 1.3.6.1.4.1.4874.2.2.58.1.1.2.1.5 | juniAtm1483ProfileAutoConfLockoutMax | Juniper-ATM-1483-Profile-MIB |