Juniper-AAA-MIB :: juniAaaMonitorIngressTrafficOnly

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › Juniper-AAA-MIB › juniAaaMonitorIngressTrafficOnly

juniAaaMonitorIngressTrafficOnly

Module: Juniper-AAA-MIB

OID (symbolic): Juniper-AAA-MIB::juniAaaMonitorIngressTrafficOnly

OID (numeric): 1.3.6.1.4.1.4874.2.2.20.1.6.1.3

Node type: OBJECT-TYPE

Type: JuniEnable

Access: read-write

Description: Enables/disables the monitoring of ingress traffic. Inactive sessions are disconnected after a period, specified in juniAaaIdleTimeout. Inactivity is determined by both inbound and outbound traffic. If this option is enabled, only ingress traffic is monitored for determining session inactivity.

What is juniAaaMonitorIngressTrafficOnly?

Enables or disables monitoring only inbound (ingress) traffic when deciding whether a session is idle for the juniAaaIdleTimeout timer; normally both inbound and outbound traffic count toward activity, but with this enabled only ingress traffic does. An admin enables this on links where outbound-only traffic (e.g. periodic keepalives from the network side) shouldn't count as the subscriber being active.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.20.1.6.1.3
snmpwalk -v2c -c public <target> Juniper-AAA-MIB::juniAaaMonitorIngressTrafficOnly

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.20.1.6.1.3.1
snmpget -v2c -c public <target> Juniper-AAA-MIB::juniAaaMonitorIngressTrafficOnly.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.20.1.6.1.3.1 s <value>

Start monitoring Juniper ERX/E-series broadband edge router (BRAS AAA) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-AAA-MIB::juniAaaMonitorIngressTrafficOnly OID value, configure state conditions and alerts, and monitor any Juniper ERX/E-series broadband edge router (BRAS AAA) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.4874juniperUniJuniper-UNI-SMI
1.3.6.1.4.1.4874.2juniperUniMibsJuniper-UNI-SMI
1.3.6.1.4.1.4874.2.2juniMibsJuniper-MIBs
Numeric OIDNameModule
1.3.6.1.4.1.4874.2.2.20juniAaaMIBJuniper-AAA-MIB
1.3.6.1.4.1.4874.2.2.20.1juniAaaObjectsJuniper-AAA-MIB
1.3.6.1.4.1.4874.2.2.20.1.6juniAaaTimeoutJuniper-AAA-MIB
1.3.6.1.4.1.4874.2.2.20.1.6.1juniAaaTimeoutGeneralJuniper-AAA-MIB
1.3.6.1.4.1.4874.2.2.20.1.6.1.3juniAaaMonitorIngressTrafficOnlyJuniper-AAA-MIB