All MIBs › Juniper-AAA-MIB › juniAaaAcctMethods
juniAaaAcctMethods
Module: Juniper-AAA-MIB
OID (symbolic): Juniper-AAA-MIB::juniAaaAcctMethods
OID (numeric): 1.3.6.1.4.1.4874.2.2.20.1.3.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The set of accounting protocols configured on this system. Each octet in this object contains one of the values defined in the JuniAaaAccountingMethods TEXTUAL CONVENTION.
The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JuniAaaAccountingMethods. Note that if the octet is set to: protocolNone(4)
Then accounting is disabled.
If an accounting protocol is configured and reports are not successfully generated, the system will move to the next octet in this object and repeat the attempt to generate an accounting report in the form dictated by the corresponding accounting protocol type. The process of sequencing thru each octet will stop if accounting reports are either successfully generated, or there are no more configured octets in this object.
What is juniAaaAcctMethods?
Obsolete, system-wide object that once listed, one octet at a time, the ordered sequence of accounting protocols (per JuniAaaAccountingMethods) the router would try, falling through to the next on failure and stopping at protocolNone. It has been replaced by the per-subscriber-type juniAaaAcctMethodsTable, which allows different subscriber types to use different accounting method sequences.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.20.1.3.1.3 snmpwalk -v2c -c public <target> Juniper-AAA-MIB::juniAaaAcctMethods
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.4874.2.2.20.1.3.1.3.1 snmpget -v2c -c public <target> Juniper-AAA-MIB::juniAaaAcctMethods.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.4874.2.2.20.1.3.1.3.1 s <value>
Start monitoring Juniper ERX/E-series broadband edge router (BRAS AAA) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Juniper-AAA-MIB::juniAaaAcctMethods OID value, configure state conditions and alerts, and monitor any Juniper ERX/E-series broadband edge router (BRAS AAA) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.4874 | juniperUni | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2 | juniperUniMibs | Juniper-UNI-SMI |
| 1.3.6.1.4.1.4874.2.2 | juniMibs | Juniper-MIBs |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.4874.2.2.20 | juniAaaMIB | Juniper-AAA-MIB |
| 1.3.6.1.4.1.4874.2.2.20.1 | juniAaaObjects | Juniper-AAA-MIB |
| 1.3.6.1.4.1.4874.2.2.20.1.3 | juniAaaAccounting | Juniper-AAA-MIB |
| 1.3.6.1.4.1.4874.2.2.20.1.3.1 | juniAaaAcctGeneral | Juniper-AAA-MIB |
| 1.3.6.1.4.1.4874.2.2.20.1.3.1.3 | juniAaaAcctMethods | Juniper-AAA-MIB |