All MIBs › JUNIPER-USER-AAA-MIB › jnxUserAAAAccessProfileAccountingOrder
jnxUserAAAAccessProfileAccountingOrder
Module: JUNIPER-USER-AAA-MIB
OID (symbolic): JUNIPER-USER-AAA-MIB::jnxUserAAAAccessProfileAccountingOrder
OID (numeric): 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.3
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The set of accounting mechanisms configured on this system. Each octet in this object contains one of the values defined in the JnxAccountingType TEXTUAL-CONVENTION. The system will sequence through each octet of this object starting at octet 1 and attempt to use the corresponding accounting protocol defined by JnxAccountingType. If an accounting protocol is configured and attempts to reach the accounting server fail, the system will move to the next octet in this object and retry the accounting in the form dictated by the corresponding accounting protocoltype. The process of sequencing thru each octet will stop if the accounting server is successfully contacted, or there are no more configured octets in this object.
What is jnxUserAAAAccessProfileAccountingOrder?
This read-only octet string (0-5 bytes) lists, in trial order, the accounting mechanisms (per JnxAccountingType) configured on this access profile, with the system falling through to the next octet only if the prior accounting server is unreachable. Admins use this to confirm accounting records will still be captured somewhere if the primary accounting server goes down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.3 snmpwalk -v2c -c public <target> JUNIPER-USER-AAA-MIB::jnxUserAAAAccessProfileAccountingOrder
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.3.1 snmpget -v2c -c public <target> JUNIPER-USER-AAA-MIB::jnxUserAAAAccessProfileAccountingOrder.1
Start monitoring Juniper Networks router/switch/security appliance (user AAA session monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-USER-AAA-MIB::jnxUserAAAAccessProfileAccountingOrder OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch/security appliance (user AAA session monitoring) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.51 | jnxUserAAAMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.51.1 | jnxUserAAAMib | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1 | jnxUserAAAObjects | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.6 | jnxUserAAAAccessProfile | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.6.1 | jnxUserAAAAccessProfileGeneral | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.6.1.1 | jnxUserAAAAccessProfileTable | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1 | jnxUserAAAAccessProfileEntry | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.6.1.1.1.3 | jnxUserAAAAccessProfileAccountingOrder | JUNIPER-USER-AAA-MIB |