All MIBs › JUNIPER-USER-AAA-MIB › jnxUserAAAAccessPoolAddressUsageAbate
jnxUserAAAAccessPoolAddressUsageAbate
Module: JUNIPER-USER-AAA-MIB
OID (symbolic): JUNIPER-USER-AAA-MIB::jnxUserAAAAccessPoolAddressUsageAbate
OID (numeric): 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.14
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The configured abate percentage threshold of addresses used in this pool or linked pool. An SNMP trap clear is generated when address use falls below this threshold percentage. This trap will only be generated for unlinked pools or pools that are the head of a linked chain of pools Conversely, if this pool it part of a linked chain of pools but not the head of the chain, then no traps will be generated.
What is jnxUserAAAAccessPoolAddressUsageAbate?
This read-only value reports the configured abate percentage threshold below which a trap-clear is generated for this pool; like the high threshold, it only applies to unlinked pools or the head of a linked chain. Admins use it to understand the hysteresis band that prevents alert flapping around the high threshold.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.14 snmpwalk -v2c -c public <target> JUNIPER-USER-AAA-MIB::jnxUserAAAAccessPoolAddressUsageAbate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.14.1 snmpget -v2c -c public <target> JUNIPER-USER-AAA-MIB::jnxUserAAAAccessPoolAddressUsageAbate.1
Start monitoring Juniper Networks router/switch/security appliance (user AAA session monitoring) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-USER-AAA-MIB::jnxUserAAAAccessPoolAddressUsageAbate OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch/security appliance (user AAA session monitoring) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.51 | jnxUserAAAMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.51.1 | jnxUserAAAMib | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1 | jnxUserAAAObjects | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.4 | jnxUserAAAAccessPool | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.4.1 | jnxUserAAAAccessPoolGeneral | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.4.1.1 | jnxUserAAAAccessPoolTable | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1 | jnxUserAAAAccessPoolEntry | JUNIPER-USER-AAA-MIB |
| 1.3.6.1.4.1.2636.3.51.1.1.4.1.1.1.14 | jnxUserAAAAccessPoolAddressUsageAbate | JUNIPER-USER-AAA-MIB |