All MIBs › JUNIPER-PW-TDM-MIB › jnxpwTDMValidIntervals
jnxpwTDMValidIntervals
Module: JUNIPER-PW-TDM-MIB
OID (symbolic): JUNIPER-PW-TDM-MIB::jnxpwTDMValidIntervals
OID (numeric): 1.3.6.1.4.1.2636.3.54.1.1.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The number of previous 15-minute intervals for which data was collected. An agent with TDM capability must be capable of supporting at least n intervals. The minimum value of n is 4, The default of n is 32 and the maximum value of n is 96. The value will be n unless the measurement was (re-) started within the last (n*15) minutes, in which case the value will be the number of complete 15 minute intervals for which the agent has at least some data. In certain cases(e.g., in the case where the agent is a proxy) it is possible that some intervals are unavailable. In this case, this interval is the maximum interval number for which data is available.
What is jnxpwTDMValidIntervals?
Count of completed 15-minute historical intervals (0-96) actually available in jnxpwTDMPerfIntervalTable for this PW; lower than expected after a recent restart or on a proxied agent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.54.1.1.1.1.7 snmpwalk -v2c -c public <target> JUNIPER-PW-TDM-MIB::jnxpwTDMValidIntervals
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.54.1.1.1.1.7.1 snmpget -v2c -c public <target> JUNIPER-PW-TDM-MIB::jnxpwTDMValidIntervals.1
Start monitoring Vendor-neutral IETF PWE3 draft standard (TDM pseudowire, RAD Data Communications editor) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-PW-TDM-MIB::jnxpwTDMValidIntervals OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF PWE3 draft standard (TDM pseudowire, RAD Data Communications editor) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.54 | jnxPwTdmMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.54.1 | jnxPWTdmMIB | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1 | jnxpwTDMObjects | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.1 | jnxpwTDMTable | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.1.1 | jnxpwTDMEntry | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.1.1.7 | jnxpwTDMValidIntervals | JUNIPER-PW-TDM-MIB |