All MIBs › JUNIPER-PW-TDM-MIB › jnxpwTDMCfgSetUp2SynchTimeOut
jnxpwTDMCfgSetUp2SynchTimeOut
Module: JUNIPER-PW-TDM-MIB
OID (symbolic): JUNIPER-PW-TDM-MIB::jnxpwTDMCfgSetUp2SynchTimeOut
OID (numeric): 1.3.6.1.4.1.2636.3.54.1.1.3.1.11
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The amount of time the host should wait before declaring the pseudo wire in down state, if the number of consecutive TDM packets that have been received after changing the adminstrative status to up and after finalization of signaling (if supported) between the two PEs is smaller than pwTDMCfgConsecPktsInSynch. Once the the pw has OperStatus of 'up' this parameter is no longer valid. This parameter is defined to ensure that the host does not prematurely inform failure of the pw. In particular pw 'down' notifications should not be sent before expiration of this timer. This parameter is valid only after adminisrative changes of the status of the pw. If the pw fails due to network impairments a 'down' notification should be sent. Object MAY be changed when the related PW is defined as not active.
What is jnxpwTDMCfgSetUp2SynchTimeOut?
How long (in milliseconds) the host waits after bringing the PW admin-up before declaring it down if not enough in-sequence packets arrived yet; prevents premature 'down' notifications during PW setup.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.54.1.1.3.1.11 snmpwalk -v2c -c public <target> JUNIPER-PW-TDM-MIB::jnxpwTDMCfgSetUp2SynchTimeOut
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.54.1.1.3.1.11.1 snmpget -v2c -c public <target> JUNIPER-PW-TDM-MIB::jnxpwTDMCfgSetUp2SynchTimeOut.1
Start monitoring Vendor-neutral IETF PWE3 draft standard (TDM pseudowire, RAD Data Communications editor) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-PW-TDM-MIB::jnxpwTDMCfgSetUp2SynchTimeOut OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF PWE3 draft standard (TDM pseudowire, RAD Data Communications editor) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.54 | jnxPwTdmMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.54.1 | jnxPWTdmMIB | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1 | jnxpwTDMObjects | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.3 | jnxpwTDMCfgTable | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1 | jnxpwTDMCfgEntry | JUNIPER-PW-TDM-MIB |
| 1.3.6.1.4.1.2636.3.54.1.1.3.1.11 | jnxpwTDMCfgSetUp2SynchTimeOut | JUNIPER-PW-TDM-MIB |