All MIBs › JUNIPER-JS-NAT-MIB › jnxJsNatSrcPortPoolType
jnxJsNatSrcPortPoolType
Module: JUNIPER-JS-NAT-MIB
OID (symbolic): JUNIPER-JS-NAT-MIB::jnxJsNatSrcPortPoolType
OID (numeric): 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Source NAT can do address translation with or without port address translation (PAT). The source port pool type indicates whether the address translation is done with port or without the port, or if it is a static translation.
withPAT(Source Pool with PAT): the security device translates both source IP address and port number of the packets
withoutPAT (Source Pool without PAT): the device performs source network address translation for the IP address without performing port address translation (PAT) for the source port number.
Static translation means that one range of IP addresses is statically mapped one to one to a shifted range of IP addresses.
What is jnxJsNatSrcPortPoolType?
Deprecated read-only enumeration on the legacy source-NAT table indicating whether this pool does address translation withPAT(1) (both IP and port rewritten), withoutPAT(2) (IP only), or static(3) (one-to-one address mapping) -- tells you whether port exhaustion (PAT) or plain address exhaustion is the relevant failure mode for this pool.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.3 snmpwalk -v2c -c public <target> JUNIPER-JS-NAT-MIB::jnxJsNatSrcPortPoolType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.3.1 snmpget -v2c -c public <target> JUNIPER-JS-NAT-MIB::jnxJsNatSrcPortPoolType.1
Start monitoring Juniper Networks SRX security device (NAT sessions/pools/rules) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-JS-NAT-MIB::jnxJsNatSrcPortPoolType OID value, configure state conditions and alerts, and monitor any Juniper Networks SRX security device (NAT sessions/pools/rules) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39 | jnxJsMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.39.1 | jnxJsSecurity | JUNIPER-JS-SMI |
| 1.3.6.1.4.1.2636.3.39.1.7 | jnxJsNAT | JUNIPER-JS-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.39.1.7.1 | jnxJsNatMIB | JUNIPER-JS-NAT-MIB |
| 1.3.6.1.4.1.2636.3.39.1.7.1.1 | jnxJsNatObjects | JUNIPER-JS-NAT-MIB |
| 1.3.6.1.4.1.2636.3.39.1.7.1.1.2 | jnxJsSrcNatTable | JUNIPER-JS-NAT-MIB |
| 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1 | jnxJsSrcNatEntry | JUNIPER-JS-NAT-MIB |
| 1.3.6.1.4.1.2636.3.39.1.7.1.1.2.1.3 | jnxJsNatSrcPortPoolType | JUNIPER-JS-NAT-MIB |