All MIBs › JUNIPER-ATM-MIB › jnxAtmVCInOAMF5AISCells
jnxAtmVCInOAMF5AISCells
Module: JUNIPER-ATM-MIB
OID (symbolic): JUNIPER-ATM-MIB::jnxAtmVCInOAMF5AISCells
OID (numeric): 1.3.6.1.4.1.2636.3.10.2.1.19
Node type: OBJECT-TYPE
Type: Counter32
Access: read-only
Description: The number of OAM F5 cells received, with AIS(Alarm Indication Signal) bit set. This object would have zero value if OAM (as indicated in jnxAtmVCFlags) is not enabled.
What is jnxAtmVCInOAMF5AISCells?
Counts OAM F5 cells received on this VC with the AIS (Alarm Indication Signal) bit set -- an upstream failure notification propagating down the circuit. Stays at zero whenever OAM isn't enabled on the VC.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.10.2.1.19 snmpwalk -v2c -c public <target> JUNIPER-ATM-MIB::jnxAtmVCInOAMF5AISCells
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.10.2.1.19.1 snmpget -v2c -c public <target> JUNIPER-ATM-MIB::jnxAtmVCInOAMF5AISCells.1
Start monitoring Juniper routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ATM-MIB::jnxAtmVCInOAMF5AISCells OID value, configure state conditions and alerts, and monitor any Juniper routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.10 | jnxAtm | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.2 | jnxAtmVCTable | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.2.1 | jnxAtmVCEntry | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.2.1.19 | jnxAtmVCInOAMF5AISCells | JUNIPER-ATM-MIB |