All MIBs › JUNIPER-ATM-MIB › jnxAtmIfRxCellFIFOOverRuns
jnxAtmIfRxCellFIFOOverRuns
Module: JUNIPER-ATM-MIB
OID (symbolic): JUNIPER-ATM-MIB::jnxAtmIfRxCellFIFOOverRuns
OID (numeric): 1.3.6.1.4.1.2636.3.10.1.1.11
Node type: OBJECT-TYPE
Type: Counter64
Access: read-only
Description: The number of overruns in the Receive FIFO.
What is jnxAtmIfRxCellFIFOOverRuns?
Counts overruns of this port's receive cell FIFO buffer, meaning incoming cells arrived faster than the device could pull them off the wire and were lost. Indicates the receive path is saturated or backed up downstream.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.10.1.1.11 snmpwalk -v2c -c public <target> JUNIPER-ATM-MIB::jnxAtmIfRxCellFIFOOverRuns
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.10.1.1.11.1 snmpget -v2c -c public <target> JUNIPER-ATM-MIB::jnxAtmIfRxCellFIFOOverRuns.1
Start monitoring Juniper routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-ATM-MIB::jnxAtmIfRxCellFIFOOverRuns OID value, configure state conditions and alerts, and monitor any Juniper routers from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.10 | jnxAtm | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.1 | jnxAtmIfTable | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.1.1 | jnxAtmIfEntry | JUNIPER-ATM-MIB |
| 1.3.6.1.4.1.2636.3.10.1.1.11 | jnxAtmIfRxCellFIFOOverRuns | JUNIPER-ATM-MIB |