All MIBs › JNX-OPT-IF-MIB › jnxoptIfPerfMonIntervalNumIntervals
jnxoptIfPerfMonIntervalNumIntervals
Module: JNX-OPT-IF-MIB
OID (symbolic): JNX-OPT-IF-MIB::jnxoptIfPerfMonIntervalNumIntervals
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of 15-minute intervals for which performance monitoring data is available. The number is the same for all the associated sub layers of the interface. An optical interface must be capable of supporting at least n intervals, where n is defined as follows: The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value of this object will be n unless performance monitoring was (re-)started for the interface within the last (n*15) minutes, in which case the value will be the number of complete 15-minute intervals since measurement was (re-)started.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3 snmpwalk -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfPerfMonIntervalNumIntervals
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3.1 snmpget -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfPerfMonIntervalNumIntervals.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> jnxoptIfPerfMonIntervalNumIntervals.1
Start monitoring Juniper Networks router with OTN/DWDM optical interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-MIB::jnxoptIfPerfMonIntervalNumIntervals OID value, configure state conditions and alerts, and monitor any Juniper Networks router with OTN/DWDM optical interfaces from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1 | jnxoptIfObjects | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.2 | jnxoptIfPerfMon | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1 | jnxoptIfPerfMonIntervalTable | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1 | jnxoptIfPerfMonIntervalEntry | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.2.1.1.3 | jnxoptIfPerfMonIntervalNumIntervals | JNX-OPT-IF-MIB |