All MIBs › JNX-OPT-IF-MIB › jnxoptIfOTUkDEGThr
jnxoptIfOTUkDEGThr
Module: JNX-OPT-IF-MIB
OID (symbolic): JNX-OPT-IF-MIB::jnxoptIfOTUkDEGThr
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9
Node type: OBJECT-TYPE
Type: JnxoptIfDEGThr
Access: read-write
Description: Indicates the threshold level for declaring a performance monitoring (PM) Second to be bad. A PM Second is declared bad if the percentage of detected errored blocks in that second is greater than or equal to jnxoptIfOTUkDEGThr. This object is only applicable to the sink function, i.e., only when jnxoptIfOTUkDirectionality has the value sink(1) or bidirectional(3). It must not be instantiated in rows where jnxoptIfOTUkDirectionality has the value source(2). The default value of this object is Severely Errored Second (SES) Estimator (See ITU-T G.7710).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9 snmpwalk -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTUkDEGThr
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9.1 snmpget -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTUkDEGThr.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9.1 s <value>
Start monitoring Juniper Networks router with OTN/DWDM optical interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-MIB::jnxoptIfOTUkDEGThr OID value, configure state conditions and alerts, and monitor any Juniper Networks router with OTN/DWDM optical interfaces from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1 | jnxoptIfObjects | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.7 | jnxoptIfOTUk | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1 | jnxoptIfOTUkConfigTable | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1 | jnxoptIfOTUkConfigEntry | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.7.1.1.9 | jnxoptIfOTUkDEGThr | JNX-OPT-IF-MIB |