All MIBs › JNX-OPT-IF-MIB › jnxoptIfOTMnOrder
jnxoptIfOTMnOrder
Module: JNX-OPT-IF-MIB
OID (symbolic): JNX-OPT-IF-MIB::jnxoptIfOTMnOrder
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This object indicates the order of the OTM, which represents the maximum number of wavelengths that can be supported at the bit rate(s) supported on the interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1 snmpwalk -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTMnOrder
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1.1 snmpget -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTMnOrder.1
Start monitoring Juniper Networks router with OTN/DWDM optical interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-MIB::jnxoptIfOTMnOrder OID value, configure state conditions and alerts, and monitor any Juniper Networks router with OTN/DWDM optical interfaces from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1 | jnxoptIfObjects | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1 | jnxoptIfOTMn | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1 | jnxoptIfOTMnTable | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1 | jnxoptIfOTMnEntry | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.1 | jnxoptIfOTMnOrder | JNX-OPT-IF-MIB |