All MIBs › JNX-OPT-IF-MIB › jnxoptIfOTMnBitRates
jnxoptIfOTMnBitRates
Module: JNX-OPT-IF-MIB
OID (symbolic): JNX-OPT-IF-MIB::jnxoptIfOTMnBitRates
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: This attribute is a bit map representing the bit rate or set of bit rates supported on the interface. The meaning of each bit position is as follows: bitRateK1(0) is set if the 2.5 Gbit/s rate is supported bitRateK2(1) is set if the 10 Gbit/s rate is supported bitRateK3(2) is set if the 40 Gbit/s rate is supported Note that each bit position corresponds to one possible value of the type JnxoptIfBitRateK. The default value of this attribute is system specific.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3 snmpwalk -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTMnBitRates
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3.1 snmpget -v2c -c public <target> JNX-OPT-IF-MIB::jnxoptIfOTMnBitRates.1
Start monitoring Juniper Networks router with OTN/DWDM optical interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-MIB::jnxoptIfOTMnBitRates OID value, configure state conditions and alerts, and monitor any Juniper Networks router with OTN/DWDM optical interfaces from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1 | jnxoptIfObjects | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1 | jnxoptIfOTMn | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1 | jnxoptIfOTMnTable | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1 | jnxoptIfOTMnEntry | JNX-OPT-IF-MIB |
| 1.3.6.1.4.1.2636.3.73.1.1.1.1.1.3 | jnxoptIfOTMnBitRates | JNX-OPT-IF-MIB |