All MIBs › JNX-OPT-IF-EXT-MIB › jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
Module: JNX-OPT-IF-EXT-MIB
OID (symbolic): JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: Inter-channel crosstalk is defined as the ratio of total power in all of the disturbing channels to that in the wanted channel, where the wanted and disturbing channels are at different wavelengths. The parameter specify the isolation of a link conforming to the 'black-link' approach such that under the worst- case operating conditions the inter-channel crosstalk at any reference point RS is less than the maximum inter-channel crosstalk value.
What is jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk?
The maximum allowed ratio, in units of 0.1 dB, of power leaking in from neighboring DWDM channels relative to the wanted channel's power at the sink, bounding how much crosstalk from adjacent wavelengths the link design permits.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 snmpwalk -v2c -c public <target> JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7.1 snmpget -v2c -c public <target> JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk.1
Start monitoring Juniper Networks DWDM/optical transport platform (Black Link/G.698.2 extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-EXT-MIB::jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk OID value, configure state conditions and alerts, and monitor any Juniper Networks DWDM/optical transport platform (Black Link/G.698.2 extension) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1.3 | jnxoptIfExtMibModule | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2 | jnxoptIfOChSrcSinkGroup | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3 | jnxoptIfOChSrcSinkConfigTable | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1 | jnxoptIfOChSrcSinkConfigEntry | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.3.1.7 | jnxoptIfOChSrcSinkMaximumInterChannelCrosstalk | JNX-OPT-IF-EXT-MIB |