All MIBs › JNX-OPT-IF-EXT-MIB › jnxoptIfOChSinkMaximumBERMantissa
jnxoptIfOChSinkMaximumBERMantissa
Module: JNX-OPT-IF-EXT-MIB
OID (symbolic): JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkMaximumBERMantissa
OID (numeric): 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This parameter indicate the maximum Bit(mantissa) error rate can be supported by the application at the Receiver. In case of FEC applications it is intended after the FEC correction.
What is jnxoptIfOChSinkMaximumBERMantissa?
Gives the mantissa of the maximum bit error rate the receiver can tolerate on this channel (paired with the Exponent object to form a value like 1x10^-N); used to judge how much margin the link has before errors become unacceptable, measured after FEC correction if FEC is in use.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 snmpwalk -v2c -c public <target> JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkMaximumBERMantissa
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4.1 snmpget -v2c -c public <target> JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkMaximumBERMantissa.1
Start monitoring Juniper Networks DWDM/optical transport platform (Black Link/G.698.2 extension) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JNX-OPT-IF-EXT-MIB::jnxoptIfOChSinkMaximumBERMantissa OID value, configure state conditions and alerts, and monitor any Juniper Networks DWDM/optical transport platform (Black Link/G.698.2 extension) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2636 | juniperMIB | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3 | jnxMibs | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73 | jnxoptIfMibRoot | JUNIPER-SMI |
| 1.3.6.1.4.1.2636.3.73.1 | jnxoptIfMibModule | JNX-OPT-IF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2636.3.73.1.3 | jnxoptIfExtMibModule | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2 | jnxoptIfOChSrcSinkGroup | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1 | jnxoptIfOChConfigExtTable | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1 | jnxoptIfOChConfigExtEntry | JNX-OPT-IF-EXT-MIB |
| 1.3.6.1.4.1.2636.3.73.1.3.2.1.1.4 | jnxoptIfOChSinkMaximumBERMantissa | JNX-OPT-IF-EXT-MIB |