JACOBS-RPL-MIB :: rplDefaultDISMessages

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsJACOBS-RPL-MIBrplDefaultDISMessages

rplDefaultDISMessages

Module: JACOBS-RPL-MIB

OID (symbolic): JACOBS-RPL-MIB::rplDefaultDISMessages

OID (numeric): 1.3.6.1.4.1.30982.1.2.1.1.2

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: The number of DIS messages that are sent as an initial probe for nearby DODAGs if the DIS mode is 'send'. The

value of this object is ignored if the DIS mode is 'silent'. Changes to this value may not persist across restarts.

What is rplDefaultDISMessages?

The number of initial DIS probe messages sent when boot-up DIS mode is 'send' (ignored if the mode is 'silent'), defaulting to 1. An admin can raise this on a lossy low-power network where a single DIS probe is likely to be missed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.30982.1.2.1.1.2
snmpwalk -v2c -c public <target> JACOBS-RPL-MIB::rplDefaultDISMessages

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.30982.1.2.1.1.2.1
snmpget -v2c -c public <target> JACOBS-RPL-MIB::rplDefaultDISMessages.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.30982.1.2.1.1.2.1 i <value>

Start monitoring Low-power/lossy wireless mesh node (IoT/sensor device, RPL routing) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JACOBS-RPL-MIB::rplDefaultDISMessages OID value, configure state conditions and alerts, and monitor any Low-power/lossy wireless mesh node (IoT/sensor device, RPL routing) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.30982jacobsJACOBS-SMI
1.3.6.1.4.1.30982.1cndsJACOBS-SMI
Numeric OIDNameModule
1.3.6.1.4.1.30982.1.2rplMibJACOBS-RPL-MIB
1.3.6.1.4.1.30982.1.2.1rplObjectsJACOBS-RPL-MIB
1.3.6.1.4.1.30982.1.2.1.1rplDefaultsJACOBS-RPL-MIB
1.3.6.1.4.1.30982.1.2.1.1.2rplDefaultDISMessagesJACOBS-RPL-MIB