All MIBs › InterSeptor-MIB › inSeptsensorConfigSensor1Alarm2State
inSeptsensorConfigSensor1Alarm2State
Module: InterSeptor-MIB
OID (symbolic): InterSeptor-MIB::inSeptsensorConfigSensor1Alarm2State
OID (numeric): 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setup the signal type to trigger alarm.
What is inSeptsensorConfigSensor1Alarm2State?
Read-write enumeration setting the electrical signal type (normally-open, normally-closed, active-high, or active-low) that sensor 1's second dry-contact alarm input uses to indicate a triggered condition, or disables that input entirely. It works the same way as InterSeptor-MIB::inSeptsensorConfigSensor1Alarm1State but governs the independent second contact.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2 snmpwalk -v2c -c public <target> InterSeptor-MIB::inSeptsensorConfigSensor1Alarm2State
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2.1 snmpget -v2c -c public <target> InterSeptor-MIB::inSeptsensorConfigSensor1Alarm2State.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2.1 i <value>
Start monitoring InterSeptor/Jacarta security appliances with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the InterSeptor-MIB::inSeptsensorConfigSensor1Alarm2State OID value, configure state conditions and alerts, and monitor any InterSeptor/Jacarta security appliances from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.19011 | jacarta | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1 | product | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3 | webAppliance | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1 | inSept | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1.1 | inSeptObjects | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1.1.4 | inSeptsensorConfig | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3 | inSeptsensorConfigSensor1 | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6 | inSeptsensorConfigSensor1Alarm2 | InterSeptor-MIB |
| 1.3.6.1.4.1.19011.1.3.1.1.4.3.6.2 | inSeptsensorConfigSensor1Alarm2State | InterSeptor-MIB |