All MIBs › IPV6-UDP-MIB › ipv6UdpIfIndex
ipv6UdpIfIndex
Module: IPV6-UDP-MIB
OID (symbolic): IPV6-UDP-MIB::ipv6UdpIfIndex
OID (numeric): 1.3.6.1.2.1.7.6.1.3
Node type: OBJECT-TYPE
Type: Ipv6IfIndexOrZero
Access: read-only
Description: An index object used to disambiguate conceptual rows in the table, since the ipv6UdpLocalAddress/ipv6UdpLocalPort pair may not be unique.
This object identifies the local interface that is associated with ipv6UdpLocalAddress for this UDP listener. If such a local interface cannot be determined, this object should take on the value 0. (A possible example of this would be if the value of ipv6UdpLocalAddress is ::0.)
The interface identified by a particular non-0 value of this index is the same interface as identified by the same value of ipv6IfIndex.
The value of this object must remain constant during
the life of this UDP endpoint.
This object is obsoleted by the zone identifier in an InetAddressIPv6z address in UDP-MIB::udpEndpointLocalAddress.
What is ipv6UdpIfIndex?
This object identifies which local network interface a UDP listener is bound to, existing mainly to disambiguate rows in the UDP table when the same local address and port pair could otherwise appear more than once; the MIB marks it obsolete. A value of zero means the listening interface couldn't be determined, while any other value points to a specific interface in the standard interfaces table. A UDP service bound specifically to an IPv6 loopback interface with ifIndex 1 would report ipv6UdpIfIndex as 1 rather than 0.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.7.6.1.3 snmpwalk -v2c -c public <target> IPV6-UDP-MIB::ipv6UdpIfIndex
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.7.6.1.3.1 snmpget -v2c -c public <target> IPV6-UDP-MIB::ipv6UdpIfIndex.1
Start monitoring Vendor-neutral IETF standard, obsolete (any IPv6-enabled server/host/network device) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPV6-UDP-MIB::ipv6UdpIfIndex OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard, obsolete (any IPv6-enabled server/host/network device) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | APERTUS-NPG-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.7 | udp | CHECKPOINT-MIB-2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.7.6 | ipv6UdpTable | IPV6-UDP-MIB |
| 1.3.6.1.2.1.7.6.1 | ipv6UdpEntry | IPV6-UDP-MIB |
| 1.3.6.1.2.1.7.6.1.3 | ipv6UdpIfIndex | IPV6-UDP-MIB |