All MIBs › IPV6-MIB › ipv6RoutePolicy
ipv6RoutePolicy
Module: IPV6-MIB
OID (symbolic): IPV6-MIB::ipv6RoutePolicy
OID (numeric): 1.3.6.1.2.1.55.1.11.1.8
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description:
The general set of conditions that would cause the selection of one multipath route (set of next hops for a given destination) is referred to as 'policy'. Unless the mechanism indicated by ipv6RouteProtocol specified otherwise, the policy specifier is the 8-bit Traffic Class field of the IPv6 packet header that is zero extended at the left to a 32-bit value.
Protocols defining 'policy' otherwise must either define a set of values which are valid for this object or must implement an integer- instanced policy table for which this object's value acts as an index.
This object is obsoleted by IP-FORWARD-MIB::inetCidrRoutePolicy.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.55.1.11.1.8 snmpwalk -v2c -c public <target> IPV6-MIB::ipv6RoutePolicy
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.55.1.11.1.8.1 snmpget -v2c -c public <target> IPV6-MIB::ipv6RoutePolicy.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.55 | ipv6MIB | IPV6-MIB |
| 1.3.6.1.2.1.55.1 | ipv6MIBObjects | IPV6-MIB |
| 1.3.6.1.2.1.55.1.11 | ipv6RouteTable | IPV6-MIB |
| 1.3.6.1.2.1.55.1.11.1 | ipv6RouteEntry | IPV6-MIB |
| 1.3.6.1.2.1.55.1.11.1.8 | ipv6RoutePolicy | IPV6-MIB |