All MIBs › IPPM-CONTROL-MIB › ippmMulticastInstantaneousMeasureSetup
ippmMulticastInstantaneousMeasureSetup
Module: IPPM-CONTROL-MIB
OID (symbolic): IPPM-CONTROL-MIB::ippmMulticastInstantaneousMeasureSetup
OID (numeric): 1.3.6.1.3.10001.1
Node type: NOTIFICATION-TYPE
Description: The definition of the setup of an instantaneous multicast measure is sent by the broadcasting application or the probe in the multicast channel using a SNMP trap defined in this notification-type.
On reception of the ippmMulticastInstantaneousMeasureSetup setup the receiver or the router:
+ timestamp the arrival time of the setup; + considers the following defaults values; + prepare the ippmMulticastInstantaneousMeasureReport notification; + send the report using a SNMP Inform PDU.
Defaults values:
IppmMeasureEntry default values:
ippmMeasureName: ippmMulticastInstantaneousMeasure;
ippmMeasureMetrics: { Type-P-One-way-Delay, Type-P-One-way-Packet-Loss, Type-P-Multicast-Instantaneous-Connectivity, (*) Type-P-spatial-hop-one-way-delay (*) }
ippmMeasureBeginTime: 0
ippmMeasureClockPeriodUnit: 0 ippmMeasureClockPeriod: 0 ippmMeasureDurationUnit: 0 ippmMeasureDuration: 0 ippmMeasureHystorySize: 0 ippmMeasureStorageType: other ippmMeasureStatus: createAndGo
IppmNetworkMeasureEntry default values:
IppmNetworkMeasureClockPattern: 0 IppmNetworkMeasureTimeoutDelay: 0 ippmNetworkMeasureL3PacketSize: 0 ippmNetworkMeasureDataPattern: 0
IppmippmReportSetupEntry default values:
IppmReportSetupDefinition: { onSingleton, inInformRequestPDU, clearHistory
}
ippmReportSetupMetricThreshold: 0 ippmReportSetupEventsDurationThreshold: 0
(*) only considered by routers.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' IPPM-CONTROL-MIB::ippmMulticastInstantaneousMeasureSetup snmptrap -v2c -c public <manager> '' 1.3.6.1.3.10001.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:50266->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (322158682) 37 days, 6:53:06.82 SNMPv2-MIB::snmpTrapOID.0 = OID: IPPM-CONTROL-MIB::ippmMulticastInstantaneousMeasureSetup
Start monitoring Vendor-neutral IETF/experimental standard (routers/probes doing IPPM active measurement) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IPPM-CONTROL-MIB::ippmMulticastInstantaneousMeasureSetup OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF/experimental standard (routers/probes doing IPPM active measurement) from a single console.
OID Breakdown
Upper-level ancestors (5 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.3 | experimental | APERTUS-NPG-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.3.10001 | ippmControlMib | IPPM-CONTROL-MIB |
| 1.3.6.1.3.10001.1 | ippmMulticastInstantaneousMeasureSetup | IPPM-CONTROL-MIB |