All MIBs › INTERFACES-MIB › t1e1OOFSStatus
t1e1OOFSStatus
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::t1e1OOFSStatus
OID (numeric): 1.3.6.1.4.1.425.8.3.2.1.30
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Indicates that the unit is unable to synchronize on the incoming framing pattern.
What is t1e1OOFSStatus?
Indicates the unit cannot synchronize on the incoming framing pattern, giving noOOF(2) or OOF(3). It usually means the framing type is set wrong or the far end is not sending proper frames.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.30 snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1OOFSStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.30.1 snmpget -v2c -c public <target> INTERFACES-MIB::t1e1OOFSStatus.1
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1OOFSStatus OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3 | t1e1 | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2 | t1e1AlarmTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1 | t1e1AlarmTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1.30 | t1e1OOFSStatus | INTERFACES-MIB |