INTERFACES-MIB :: t1e1FrameType

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › t1e1FrameType

t1e1FrameType

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::t1e1FrameType

OID (numeric): 1.3.6.1.4.1.425.8.3.1.1.6

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Selects the framing for the network side of the DSU/CSU.

What is t1e1FrameType?

Framing used on the network side of the DSU/CSU: ESF(2), D4(3), CCS-CRC(4), CCS(5), CAS(6), CAS-CRC(7) or Unframed(8). It must match the carrier's circuit; for example ESF is common on modern T1 lines and CCS-CRC on E1.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.6
snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1FrameType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.6.1
snmpget -v2c -c public <target> INTERFACES-MIB::t1e1FrameType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.1.1.6.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1FrameType OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.3t1e1INTERFACES-MIB
1.3.6.1.4.1.425.8.3.1t1e1ConfigTableINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1t1e1ConfigTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1.6t1e1FrameTypeINTERFACES-MIB