INTERFACES-MIB :: t1e1DSXLevel

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › t1e1DSXLevel

t1e1DSXLevel

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::t1e1DSXLevel

OID (numeric): 1.3.6.1.4.1.425.8.3.1.1.17

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Selects the DSX1 interface output level.

What is t1e1DSXLevel?

Selects the DSX-1 output level of the T1/E1 port as a cable-length band: 0-110 ft(2), 111-220 ft(3), 221-330 ft(4), 331-440 ft(5), 441-550 ft(6), 551-660 ft(7) or 661 ft and up(8). Set it to the distance to the connected equipment so the signal is neither too weak nor too hot.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.17
snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1DSXLevel

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.17.1
snmpget -v2c -c public <target> INTERFACES-MIB::t1e1DSXLevel.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.1.1.17.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1DSXLevel OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.3t1e1INTERFACES-MIB
1.3.6.1.4.1.425.8.3.1t1e1ConfigTableINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1t1e1ConfigTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1.17t1e1DSXLevelINTERFACES-MIB