All MIBs › INTERFACES-MIB › t1e1CRC4Mode
t1e1CRC4Mode
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::t1e1CRC4Mode
OID (numeric): 1.3.6.1.4.1.425.8.3.1.1.16
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Selects whether CRC4 is enabled or disabled.
What is t1e1CRC4Mode?
Enables or disables CRC4 error checking on an E1 port (enabled(3), disabled(2), other(1)). It must agree with the far end and carrier or the link will report frame errors.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.16 snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1CRC4Mode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.16.1 snmpget -v2c -c public <target> INTERFACES-MIB::t1e1CRC4Mode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.1.1.16.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1CRC4Mode OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3 | t1e1 | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.1 | t1e1ConfigTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.1.1 | t1e1ConfigTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.1.1.16 | t1e1CRC4Mode | INTERFACES-MIB |