INTERFACES-MIB :: t1e1AudibleAlarm

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › t1e1AudibleAlarm

t1e1AudibleAlarm

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::t1e1AudibleAlarm

OID (numeric): 1.3.6.1.4.1.425.8.3.1.1.20

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: If applicable, Enables or Disables the CSU's internal buzzer which alerts users of an alarm condition.

What is t1e1AudibleAlarm?

If the hardware has one, enables(3) or disables(2) the CSU's internal buzzer that sounds on an alarm condition. Disable it for equipment in occupied spaces once alarms are monitored remotely.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.20
snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1AudibleAlarm

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.1.1.20.1
snmpget -v2c -c public <target> INTERFACES-MIB::t1e1AudibleAlarm.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.1.1.20.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1AudibleAlarm OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.3t1e1INTERFACES-MIB
1.3.6.1.4.1.425.8.3.1t1e1ConfigTableINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1t1e1ConfigTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.3.1.1.20t1e1AudibleAlarmINTERFACES-MIB