All MIBs › INTERFACES-MIB › t1e1AlarmResetTimer
t1e1AlarmResetTimer
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::t1e1AlarmResetTimer
OID (numeric): 1.3.6.1.4.1.425.8.3.2.1.42
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900.
What is t1e1AlarmResetTimer?
Alarm Reset Timer in seconds, 0 to 900. It sets the delay used when resetting alarm conditions; the source gives only the range.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.42 snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1AlarmResetTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.42.1 snmpget -v2c -c public <target> INTERFACES-MIB::t1e1AlarmResetTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.2.1.42.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1AlarmResetTimer OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3 | t1e1 | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2 | t1e1AlarmTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1 | t1e1AlarmTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1.42 | t1e1AlarmResetTimer | INTERFACES-MIB |