All MIBs › INTERFACES-MIB › t1e1AlarmReset
t1e1AlarmReset
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::t1e1AlarmReset
OID (numeric): 1.3.6.1.4.1.425.8.3.2.1.43
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is used to clear the current alarm counts.
What is t1e1AlarmReset?
Write clearAlarms(2) to clear the current alarm counts on the port; other(1) is a placeholder. Use it after fixing a line problem to start counting from zero.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.43 snmpwalk -v2c -c public <target> INTERFACES-MIB::t1e1AlarmReset
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.3.2.1.43.1 snmpget -v2c -c public <target> INTERFACES-MIB::t1e1AlarmReset.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.3.2.1.43.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::t1e1AlarmReset OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3 | t1e1 | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2 | t1e1AlarmTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1 | t1e1AlarmTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.3.2.1.43 | t1e1AlarmReset | INTERFACES-MIB |