INTERFACES-MIB :: serialDteParity

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › serialDteParity

serialDteParity

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::serialDteParity

OID (numeric): 1.3.6.1.4.1.425.8.5.1.1.9

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This variable describes the current parity selected for the DTE interface. This variable is only valid when the DTE Mode is set to ASYNC. The values mean: serialDteParityNone The DTE interface is currently set for no parity bit checking or generation serialDteParityOdd The DTE interface is currently set for odd parity serialDteParityEven The DTE interface is currently set for even parity serialDteParityMark The DTE interface is currently set for mark parity serialDteParitySpace The DTE interface is currently set for space parity serialDteParityNotAvail The parity setting on the DTE interface is not available.

What is serialDteParity?

Parity selected for the serial interface: none(2), odd(3), even(4), mark(5), space(6) or notAvail. It is only valid when the interface is in asynchronous mode, and must match the attached device's setting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.9
snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteParity

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.9.1
snmpget -v2c -c public <target> INTERFACES-MIB::serialDteParity.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.5.1.1.9.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteParity OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.5serialDteINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1serialDteConfigTableINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1.1serialDteConfigTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1.1.9serialDteParityINTERFACES-MIB