INTERFACES-MIB :: serialDteLOSStatus

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › serialDteLOSStatus

serialDteLOSStatus

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::serialDteLOSStatus

OID (numeric): 1.3.6.1.4.1.425.8.5.2.1.16

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Reports if an LOS condition exists on the interface.

What is serialDteLOSStatus?

Reports whether a loss of signal (LOS) condition exists on the serial interface: noLOS(2) or LOS(3). It suggests the attached device or cable is not providing a signal.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.16
snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteLOSStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.16.1
snmpget -v2c -c public <target> INTERFACES-MIB::serialDteLOSStatus.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> serialDteLOSStatus.1

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteLOSStatus OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.5serialDteINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2serialDteAlarmTableINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1serialDteAlarmTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1.16serialDteLOSStatusINTERFACES-MIB