INTERFACES-MIB :: serialDteFDLThreshold

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › serialDteFDLThreshold

serialDteFDLThreshold

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::serialDteFDLThreshold

OID (numeric): 1.3.6.1.4.1.425.8.5.2.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The number of FDL errored seconds that must be received before an alarm is declared.

What is serialDteFDLThreshold?

Number of FDL errored seconds that must be received before an alarm is declared on the serial port. Set it to the tolerance you accept before alerting.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.14
snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteFDLThreshold

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.14.1
snmpget -v2c -c public <target> INTERFACES-MIB::serialDteFDLThreshold.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.5.2.1.14.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteFDLThreshold OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.5serialDteINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2serialDteAlarmTableINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1serialDteAlarmTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1.14serialDteFDLThresholdINTERFACES-MIB