INTERFACES-MIB :: serialDteDTRAlarmControl

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › serialDteDTRAlarmControl

serialDteDTRAlarmControl

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::serialDteDTRAlarmControl

OID (numeric): 1.3.6.1.4.1.425.8.5.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies if the unit should alarm on loss of DTR.

What is serialDteDTRAlarmControl?

Specifies whether the unit raises an alarm on loss of DTR (enable(3) or disable(2)). Enable it to be warned when the attached device powers down or disconnects.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.4
snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteDTRAlarmControl

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.2.1.4.1
snmpget -v2c -c public <target> INTERFACES-MIB::serialDteDTRAlarmControl.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.5.2.1.4.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteDTRAlarmControl OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.5serialDteINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2serialDteAlarmTableINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1serialDteAlarmTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.5.2.1.4serialDteDTRAlarmControlINTERFACES-MIB