All MIBs › INTERFACES-MIB › serialDteDCD
serialDteDCD
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::serialDteDCD
OID (numeric): 1.3.6.1.4.1.425.8.5.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Selects DCD behavior.
What is serialDteDCD?
Selects DCD (carrier detect) behavior of the serial port: idleOff(2), forcedOn(3), forcedOff(4), internal(5) or follow the far end's RTS(6). Use forced on for devices that need a constant carrier indication.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.13 snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteDCD
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.13.1 snmpget -v2c -c public <target> INTERFACES-MIB::serialDteDCD.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.5.1.1.13.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteDCD OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.5 | serialDte | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.5.1 | serialDteConfigTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.5.1.1 | serialDteConfigTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.5.1.1.13 | serialDteDCD | INTERFACES-MIB |