INTERFACES-MIB :: serialDteChannelRate

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › serialDteChannelRate

serialDteChannelRate

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::serialDteChannelRate

OID (numeric): 1.3.6.1.4.1.425.8.5.1.1.25

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Specifies the rate of all channels assigned to the serial port.

What is serialDteChannelRate?

Rate of all channels assigned to the serial port: Nx56k(2) or Nx64k(3). Use Nx56k where the circuit uses robbed-bit signaling and Nx64k for clear channels.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.25
snmpwalk -v2c -c public <target> INTERFACES-MIB::serialDteChannelRate

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.5.1.1.25.1
snmpget -v2c -c public <target> INTERFACES-MIB::serialDteChannelRate.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.5.1.1.25.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::serialDteChannelRate OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.5serialDteINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1serialDteConfigTableINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1.1serialDteConfigTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.5.1.1.25serialDteChannelRateINTERFACES-MIB