All MIBs › INTERFACES-MIB › ddsNetOOFAlarm
ddsNetOOFAlarm
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::ddsNetOOFAlarm
OID (numeric): 1.3.6.1.4.1.425.8.4.2.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This status indicates if the Out of Frame Seconds threshold is exceeded.
What is ddsNetOOFAlarm?
Indicates whether the Out of Frame seconds threshold on the DDS port has been exceeded: none(2) or thresholdExceeded(3). Check the circuit and rate settings when it fires.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.4.2.1.13 snmpwalk -v2c -c public <target> INTERFACES-MIB::ddsNetOOFAlarm
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.4.2.1.13.1 snmpget -v2c -c public <target> INTERFACES-MIB::ddsNetOOFAlarm.1
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::ddsNetOOFAlarm OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4 | ddsNet | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.2 | ddsNetAlarmTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.2.1 | ddsNetAlarmTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.2.1.13 | ddsNetOOFAlarm | INTERFACES-MIB |