All MIBs › INTERFACES-MIB › ddsNetMode
ddsNetMode
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::ddsNetMode
OID (numeric): 1.3.6.1.4.1.425.8.4.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This variable describes mode in which data is being sent from the DDS unit back towards the network. Changing the value of this variable can cause a loss of remote communications. The values mean: ddsNetModeNormal (DDS-I) normal data mode of operation ddsNetModeProprietaryTXPI (DDS-I) data being sent out on the DDS network is in a proprietary mode to allow for remote communications, rate adaption, and SYNC to ASYNC modes ddsNetMode64KClearChannel (DDS-II) A special case of DDS-II, where the line rate is 72K, the data rate is 64K, and there is no secondary channel. ddsNetMode64KCCProprietaryTXPII (DDS-II) A special case of DDS-II, where the line rate is 72K, the data rate is 64K, and there is no secondary channel. In addition, the data being sent out on the DDS network is in a proprietary mode to allow for remote communications, rate adaption, SYNC to ASYNC, and/or TDM modes.
What is ddsNetMode?
Mode in which data is sent from the DDS unit toward the network: normal DDS-I(1), proprietary TXPI(2) for remote communications and rate adaption, 64K clear channel(3) or 64K clear channel proprietary TXPII(4), both DDS-II at 72K line rate. The source warns that changing it can lose remote communications.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.4.1.1.6 snmpwalk -v2c -c public <target> INTERFACES-MIB::ddsNetMode
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.4.1.1.6.1 snmpget -v2c -c public <target> INTERFACES-MIB::ddsNetMode.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.4.1.1.6.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::ddsNetMode OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4 | ddsNet | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.1 | ddsNetConfigTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.1.1 | ddsNetConfigTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.4.1.1.6 | ddsNetMode | INTERFACES-MIB |