INTERFACES-MIB :: ddsNetAlarmResetTimer

MIB Reference — IPNetwork Monitor · Updated October 02, 2026

All MIBs › INTERFACES-MIB › ddsNetAlarmResetTimer

ddsNetAlarmResetTimer

Module: INTERFACES-MIB

OID (symbolic): INTERFACES-MIB::ddsNetAlarmResetTimer

OID (numeric): 1.3.6.1.4.1.425.8.4.2.1.22

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900.

What is ddsNetAlarmResetTimer?

Alarm Reset Timer for the DDS port, settable from 0 to 900. The source gives only the range, so treat the value as the delay used when alarms are reset.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.4.2.1.22
snmpwalk -v2c -c public <target> INTERFACES-MIB::ddsNetAlarmResetTimer

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.4.2.1.22.1
snmpget -v2c -c public <target> INTERFACES-MIB::ddsNetAlarmResetTimer.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.4.2.1.22.1 i <value>

Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::ddsNetAlarmResetTimer OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.

OID Breakdown

Upper-level ancestors (6 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
Numeric OIDNameModule
1.3.6.1.4.1.425txportINTERFACES-MIB
1.3.6.1.4.1.425.8tinterfacesINTERFACES-MIB
1.3.6.1.4.1.425.8.4ddsNetINTERFACES-MIB
1.3.6.1.4.1.425.8.4.2ddsNetAlarmTableINTERFACES-MIB
1.3.6.1.4.1.425.8.4.2.1ddsNetAlarmTableEntryINTERFACES-MIB
1.3.6.1.4.1.425.8.4.2.1.22ddsNetAlarmResetTimerINTERFACES-MIB