All MIBs › INTERFACES-MIB › dbuActivator1
dbuActivator1
Module: INTERFACES-MIB
OID (symbolic): INTERFACES-MIB::dbuActivator1
OID (numeric): 1.3.6.1.4.1.425.8.2.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object is the identifier of the current trigger that will activate the Dial Backup Unit. The values mean: dbuActivatorLOS The dial backup unit is activated by a LOS alarm condition dbuActivatorOOS The dial backup unit is activated by an OOS alarm condition dbuActivatorOOF The dial backup unit is activated by an OOF alarm condition dbuActivatorAny The dial backup unit is activated by a LOS, OOS, or OOF alarm condition dbuActivatorES The dial backup unit is activated by an ES alarm condition dbuActivatorSES The dial backup unit is activated by an SES alarm condition dbuActivatorUAS The dial backup unit is activated by an UAS alarm condition dbuActivatorLOF The dial backup unit is activated by an LOF alarm condition dbuActivatorRAS The dial backup unit is activated by an RAS alarm condition dbuActivatorAIS The dial backup unit is activated by an AIS alarm condition dbuActivatorBPV The dial backup unit is activated by an BPV alarm condition
What is dbuActivator1?
First trigger condition that makes the dial backup unit activate, such as LOS(2), OOS(3), OOF(4), any of those three(5), ES(6), SES(7), UAS(8), LOF(9), RAS(10), AIS(11) or BPV(12) alarm conditions. For example LOS means the backup dials when the primary line loses signal.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.425.8.2.1.1.11 snmpwalk -v2c -c public <target> INTERFACES-MIB::dbuActivator1
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.425.8.2.1.1.11.1 snmpget -v2c -c public <target> INTERFACES-MIB::dbuActivator1.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.425.8.2.1.1.11.1 i <value>
Start monitoring Networking equipment with auxiliary dial-up/management port (txport device tree) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTERFACES-MIB::dbuActivator1 OID value, configure state conditions and alerts, and monitor any Networking equipment with auxiliary dial-up/management port (txport device tree) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.425 | txport | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8 | tinterfaces | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.2 | dbu | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.2.1 | dbuConfigTable | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.2.1.1 | dbuConfigTableEntry | INTERFACES-MIB |
| 1.3.6.1.4.1.425.8.2.1.1.11 | dbuActivator1 | INTERFACES-MIB |