All MIBs › INTEL-IPROUTER-MIB › confIfRouteProto
confIfRouteProto
Module: INTEL-IPROUTER-MIB
OID (symbolic): INTEL-IPROUTER-MIB::confIfRouteProto
OID (numeric): 1.3.6.1.4.1.343.6.21.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Routing Protocol used on the link.
What is confIfRouteProto?
Selects which routing protocol runs on this link: none, RIP version 1, or RIP version 2. An admin sets this to enable dynamic route learning/advertising on the interface instead of relying only on static routes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.21.1.1.1.6 snmpwalk -v2c -c public <target> INTEL-IPROUTER-MIB::confIfRouteProto
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.21.1.1.1.6.1 snmpget -v2c -c public <target> INTEL-IPROUTER-MIB::confIfRouteProto.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.21.1.1.1.6.1 i <value>
Start monitoring Intel IP router (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-IPROUTER-MIB::confIfRouteProto OID value, configure state conditions and alerts, and monitor any Intel IP router (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.21 | iprouter | INTEL-IPROUTER-MIB |
| 1.3.6.1.4.1.343.6.21.1 | conf | INTEL-IPROUTER-MIB |
| 1.3.6.1.4.1.343.6.21.1.1 | confIfTable | INTEL-IPROUTER-MIB |
| 1.3.6.1.4.1.343.6.21.1.1.1 | confIfEntry | INTEL-IPROUTER-MIB |
| 1.3.6.1.4.1.343.6.21.1.1.1.6 | confIfRouteProto | INTEL-IPROUTER-MIB |