All MIBs › INTEL-FW-MIB › fwInfoGoUpgrade
fwInfoGoUpgrade
Module: INTEL-FW-MIB
OID (symbolic): INTEL-FW-MIB::fwInfoGoUpgrade
OID (numeric): 1.3.6.1.4.1.343.6.9.1.5
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Reboot unit to run on downloaded image This will perform a warm reset but before that it will be made sure that the product is able to boot the new image even if only a plug-in has been downloaded
What is fwInfoGoUpgrade?
Writing to this object reboots the unit to run the newly downloaded firmware image; the device performs a warm reset only after confirming it can boot the new image, even if only a plug-in was downloaded.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.9.1.5 snmpwalk -v2c -c public <target> INTEL-FW-MIB::fwInfoGoUpgrade
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.9.1.5.1 snmpget -v2c -c public <target> INTEL-FW-MIB::fwInfoGoUpgrade.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.9.1.5.1 i <value>
Start monitoring Intel modular network switch/chassis (firmware module inventory) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-FW-MIB::fwInfoGoUpgrade OID value, configure state conditions and alerts, and monitor any Intel modular network switch/chassis (firmware module inventory) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.9 | fw | INTEL-FW-MIB |
| 1.3.6.1.4.1.343.6.9.1 | fwInfo | INTEL-FW-MIB |
| 1.3.6.1.4.1.343.6.9.1.5 | fwInfoGoUpgrade | INTEL-FW-MIB |