All MIBs › INTEL-DHCPS-MIB › dhcpsConfData
dhcpsConfData
Module: INTEL-DHCPS-MIB
OID (symbolic): INTEL-DHCPS-MIB::dhcpsConfData
OID (numeric): 1.3.6.1.4.1.343.6.7.2.2.1.4
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The data. All numbers are big-endian. KBE.1 is of type noTable and has the following layout: UINT32 lease_time; BYTE domain_name[27]; BYTE limit_lease; UINT32 primary_dns; UINT32 secondary_dns; UINT32 primary_wins; UINT32 secondary_wins; BYTE node_type; BYTE server_enabled; UINT16 max_entries; KBE.2 is of type tableIndexSize0 and has the following layout: UINT32 start_addr; UINT32 stop_addr; UINT32 mask;
What is dhcpsConfData?
This object holds the raw configuration data, up to 255 bytes, for a parameter block entry, laid out in big-endian binary structures documented per block type — for example KBE.1 packs lease time, domain name, DNS/WINS server addresses, and node type, while KBE.2 packs a start address, stop address, and subnet mask for an address pool range. An admin or management tool reads and writes this raw byte structure to view or change low-level DHCP server settings like lease time or the address pool range. For example, writing a new start_addr, stop_addr, and mask into the KBE.2-typed entry reconfigures the DHCP server's assignable address range.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.7.2.2.1.4 snmpwalk -v2c -c public <target> INTEL-DHCPS-MIB::dhcpsConfData
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.7.2.2.1.4.1 snmpget -v2c -c public <target> INTEL-DHCPS-MIB::dhcpsConfData.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.7.2.2.1.4.1 s <value>
Start monitoring Server/appliance running Intel DHCP server software with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-DHCPS-MIB::dhcpsConfData OID value, configure state conditions and alerts, and monitor any Server/appliance running Intel DHCP server software from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.7 | dhcps | INTEL-DHCPS-MIB |
| 1.3.6.1.4.1.343.6.7.2 | dhcpsConf | INTEL-DHCPS-MIB |
| 1.3.6.1.4.1.343.6.7.2.2 | dhcpsConfTable | INTEL-DHCPS-MIB |
| 1.3.6.1.4.1.343.6.7.2.2.1 | dhcpsConfEntry | INTEL-DHCPS-MIB |
| 1.3.6.1.4.1.343.6.7.2.2.1.4 | dhcpsConfData | INTEL-DHCPS-MIB |