All MIBs › IEEE8021-TSN-REMOTE-MANAGEMENT-MIB › ieee8021TsnRemoteMgmtMrpOperRequestListLength
ieee8021TsnRemoteMgmtMrpOperRequestListLength
Module: IEEE8021-TSN-REMOTE-MANAGEMENT-MIB
OID (symbolic): IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtMrpOperRequestListLength
OID (numeric): 1.3.111.2.802.1.1.32.1.4.1.1.8
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute is used to provide the operational value of the ieee8021TsnRemoteMgmtMrpAdminRequestListLength attribute, and it is copied at the same time that ieee8021TsnRemoteMgmtMrpAdminRequestList attribute is copied to ieee8021TsnRemoteMgmtMrpOperRequestList.
What is ieee8021TsnRemoteMgmtMrpOperRequestListLength?
This read-only value reports the length in octets of the currently operational MRP request list on this port, mirroring the admin length once applied. Admins or controllers use it to quickly verify the operational list's size matches what was requested, without needing to compare the full byte content. For example, if ieee8021TsnRemoteMgmtMrpOperRequestListLength doesn't match the previously submitted admin length, the controller knows its requested change hasn't fully propagated yet.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.32.1.4.1.1.8 snmpwalk -v2c -c public <target> IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtMrpOperRequestListLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.32.1.4.1.1.8.1 snmpget -v2c -c public <target> IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtMrpOperRequestListLength.1
Start monitoring Vendor-neutral IEEE 802.1Q standard (centrally-managed TSN bridge/switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtMrpOperRequestListLength OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1Q standard (centrally-managed TSN bridge/switch) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.32 | ieee8021TsnRemoteMgmtMib | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1 | ieee8021TsnRemoteMgmtObjects | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.4 | ieee8021TsnRemoteMgmtMrpExternalControl | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.4.1 | ieee8021TsnRemoteMgmtMsrpMrpExternalControlTable | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.4.1.1 | ieee8021TsnRemoteMgmtMsrpMrpExternalControlEntry | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.4.1.1.8 | ieee8021TsnRemoteMgmtMrpOperRequestListLength | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |