All MIBs › IEEE8021-TSN-REMOTE-MANAGEMENT-MIB › ieee8021TsnRemoteMgmtDependentDelayMax
ieee8021TsnRemoteMgmtDependentDelayMax
Module: IEEE8021-TSN-REMOTE-MANAGEMENT-MIB
OID (symbolic): IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtDependentDelayMax
OID (numeric): 1.3.111.2.802.1.1.32.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: This attribute provides the maximum length-dependent delay from ingress port to egress port.
It provides the portion of delay that is dependent on frame length, where frame length is the number of octets that transfer across the MAC Service interfaces. Each length-dependent delay attribute specifies the time for a single octet of the frame to transfer from ingress to egress.
What is ieee8021TsnRemoteMgmtDependentDelayMax?
This read-only value reports the maximum per-octet forwarding delay component for this bridge port, the worst-case portion of latency that scales with frame length. TSN network engineers use it to compute the upper bound of a frame's total forwarding delay once combined with the frame's octet count and the independent delay values. For example, a longer, maximum-size frame traversing a port with a higher ieee8021TsnRemoteMgmtDependentDelayMax will contribute noticeably more length-dependent latency than a short control frame on the same port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.32.1.1.1.1.6 snmpwalk -v2c -c public <target> IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtDependentDelayMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.32.1.1.1.1.6.1 snmpget -v2c -c public <target> IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtDependentDelayMax.1
Start monitoring Vendor-neutral IEEE 802.1Q standard (centrally-managed TSN bridge/switch) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-TSN-REMOTE-MANAGEMENT-MIB::ieee8021TsnRemoteMgmtDependentDelayMax OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1Q standard (centrally-managed TSN bridge/switch) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.32 | ieee8021TsnRemoteMgmtMib | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1 | ieee8021TsnRemoteMgmtObjects | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.1 | ieee8021TsnRemoteMgmtBridgeDelay | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.1.1 | ieee8021TsnRemoteMgmtBridgeDelayTable | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.1.1.1 | ieee8021TsnRemoteMgmtBridgeDelayEntry | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |
| 1.3.111.2.802.1.1.32.1.1.1.1.6 | ieee8021TsnRemoteMgmtDependentDelayMax | IEEE8021-TSN-REMOTE-MANAGEMENT-MIB |