IEEE8021-Q-BRIDGE-MIB :: ieee8021QBridgeTpFdbStatus

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsIEEE8021-Q-BRIDGE-MIBieee8021QBridgeTpFdbStatus

ieee8021QBridgeTpFdbStatus

Module: IEEE8021-Q-BRIDGE-MIB

OID (symbolic): IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeTpFdbStatus

OID (numeric): 1.3.111.2.802.1.1.4.1.2.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The status of this entry. The meanings of the values are: other(1) - none of the following. This may include the case where some other MIB object (not the corresponding instance of ieee8021QBridgeTpFdbPort, nor an entry in the ieee8021QBridgeStaticUnicastTable) is being used to determine if and how frames addressed to the value of the corresponding instance of ieee8021QBridgeTpFdbAddress are being forwarded. invalid(2) - this entry is no longer valid (e.g., it was learned but has since aged out), but has not yet been flushed from the table. learned(3) - the value of the corresponding instance of ieee8021QBridgeTpFdbPort was learned and is being used. self(4) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress represents one of the device's addresses. The corresponding instance of ieee8021QBridgeTpFdbPort indicates which of the device's ports has this address. mgmt(5) - the value of the corresponding instance of ieee8021QBridgeTpFdbAddress is also the value of an existing instance of ieee8021QBridgeStaticUnicastAddress.

What is ieee8021QBridgeTpFdbStatus?

How this forwarding-database entry for a MAC address came to exist: learned(3) via normal dynamic learning, self(4) for one of the switch's own addresses, mgmt(5) for a statically configured address, invalid(2) if it has aged out but not yet been flushed, or other(1).

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.4.1.2.2.1.3
snmpwalk -v2c -c public <target> IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeTpFdbStatus

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.111.2.802.1.1.4.1.2.2.1.3.1
snmpget -v2c -c public <target> IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeTpFdbStatus.1

Start monitoring Vendor-neutral IEEE 802.1Q standard (VLAN-capable Ethernet switch/bridge) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeTpFdbStatus OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1Q standard (VLAN-capable Ethernet switch/bridge) from a single console.

OID Breakdown

Upper-level ancestors (3 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.111.2.802.1.1ieee802dot1mibsIEEE8021-TC-MIB
Numeric OIDNameModule
1.3.111.2.802.1.1.4ieee8021QBridgeMibIEEE8021-Q-BRIDGE-MIB
1.3.111.2.802.1.1.4.1ieee8021QBridgeMibObjectsIEEE8021-Q-BRIDGE-MIB
1.3.111.2.802.1.1.4.1.2ieee8021QBridgeTpIEEE8021-Q-BRIDGE-MIB
1.3.111.2.802.1.1.4.1.2.2ieee8021QBridgeTpFdbTableIEEE8021-Q-BRIDGE-MIB
1.3.111.2.802.1.1.4.1.2.2.1ieee8021QBridgeTpFdbEntryIEEE8021-Q-BRIDGE-MIB
1.3.111.2.802.1.1.4.1.2.2.1.3ieee8021QBridgeTpFdbStatusIEEE8021-Q-BRIDGE-MIB