All MIBs › IEEE8021-Q-BRIDGE-MIB › ieee8021QBridgeForwardAllStaticPorts
ieee8021QBridgeForwardAllStaticPorts
Module: IEEE8021-Q-BRIDGE-MIB
OID (symbolic): IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeForwardAllStaticPorts
OID (numeric): 1.3.111.2.802.1.1.4.1.2.4.1.3
Node type: OBJECT-TYPE
Type: PortList
Access: read-write
Description: The set of ports configured by management in this VLAN to which all multicast group-addressed frames are to be forwarded. Ports entered in this list will also appear in the complete set shown by ieee8021QBridgeForwardAllPorts. This value will be restored after the device is reset. This only applies to ports that are members of the VLAN, defined by ieee8021QBridgeVlanCurrentEgressPorts. A port may not be added in this set if it is already a member of the set of ports in ieee8021QBridgeForwardAllForbiddenPorts. The default value is a string of ones of appropriate length, to indicate the standard behavior of using basic filtering services, i.e., forward all multicasts to all ports.
The value of this object MUST be retained across reinitializations of the management system.
What is ieee8021QBridgeForwardAllStaticPorts?
The set of ports an admin has statically configured to receive all multicast traffic on this VLAN regardless of any dynamic MMRP registration; defaults to all ports (forward-all-multicasts) and survives a reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.111.2.802.1.1.4.1.2.4.1.3 snmpwalk -v2c -c public <target> IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeForwardAllStaticPorts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.111.2.802.1.1.4.1.2.4.1.3.1 snmpget -v2c -c public <target> IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeForwardAllStaticPorts.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.111.2.802.1.1.4.1.2.4.1.3.1 s <value>
Start monitoring Vendor-neutral IEEE 802.1Q standard (VLAN-capable Ethernet switch/bridge) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-Q-BRIDGE-MIB::ieee8021QBridgeForwardAllStaticPorts OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1Q standard (VLAN-capable Ethernet switch/bridge) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.4 | ieee8021QBridgeMib | IEEE8021-Q-BRIDGE-MIB |
| 1.3.111.2.802.1.1.4.1 | ieee8021QBridgeMibObjects | IEEE8021-Q-BRIDGE-MIB |
| 1.3.111.2.802.1.1.4.1.2 | ieee8021QBridgeTp | IEEE8021-Q-BRIDGE-MIB |
| 1.3.111.2.802.1.1.4.1.2.4 | ieee8021QBridgeForwardAllTable | IEEE8021-Q-BRIDGE-MIB |
| 1.3.111.2.802.1.1.4.1.2.4.1 | ieee8021QBridgeForwardAllEntry | IEEE8021-Q-BRIDGE-MIB |
| 1.3.111.2.802.1.1.4.1.2.4.1.3 | ieee8021QBridgeForwardAllStaticPorts | IEEE8021-Q-BRIDGE-MIB |