All MIBs › IEEE8021-PBBTE-MIB › ieee8021PbbTeProtectionGroupAdminFailure
ieee8021PbbTeProtectionGroupAdminFailure
Module: IEEE8021-PBBTE-MIB
OID (symbolic): IEEE8021-PBBTE-MIB::ieee8021PbbTeProtectionGroupAdminFailure
OID (numeric): 1.3.111.2.802.1.1.10.0.1
Node type: NOTIFICATION-TYPE
Description: A protection group generates this notification whenever an adminisistrative command cannot be executed by the protection state machine. For example, a requested manual switch cannot be performed because of a signal failure condition.
The management entity receiving the notification can identify the system from the network source address of the notification and can identify the protection group by the indices of the OID of the ieee8021PbbTeProtectionGroupConfigState variable in the notification:
ieee8021BridgeBaseComponentId - Identifies the component on the Bridge where the protection group is configured.
ieee8021PbbTeProtectionGroupListGroupId - The id of the protection group.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' IEEE8021-PBBTE-MIB::ieee8021PbbTeProtectionGroupAdminFailure snmptrap -v2c -c public <manager> '' 1.3.111.2.802.1.1.10.0.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:56889->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (445365817) 51 days, 13:07:38.17 SNMPv2-MIB::snmpTrapOID.0 = OID: IEEE8021-PBBTE-MIB::ieee8021PbbTeProtectionGroupAdminFailure
Start monitoring Vendor-neutral IEEE 802.1Qay standard (carrier-grade Ethernet switch/bridge, PBB-TE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE8021-PBBTE-MIB::ieee8021PbbTeProtectionGroupAdminFailure OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.1Qay standard (carrier-grade Ethernet switch/bridge, PBB-TE) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.111.2.802.1.1 | ieee802dot1mibs | IEEE8021-TC-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.111.2.802.1.1.10 | ieee8021PbbTeMib | IEEE8021-PBBTE-MIB |
| 1.3.111.2.802.1.1.10.0 | ieee8021PbbTeNotifications | IEEE8021-PBBTE-MIB |
| 1.3.111.2.802.1.1.10.0.1 | ieee8021PbbTeProtectionGroupAdminFailure | IEEE8021-PBBTE-MIB |