All MIBs › IEEE-802DOT17-RPR-MIB › rprIfProtectionSlowTimer
rprIfProtectionSlowTimer
Module: IEEE-802DOT17-RPR-MIB
OID (symbolic): IEEE-802DOT17-RPR-MIB::rprIfProtectionSlowTimer
OID (numeric): 1.0.8802.17.1.1.1.1.1.1.6
Node type: OBJECT-TYPE
Type: Gauge
Access: read-write
Description: Indicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols.
Default value for slow timer protection and topology messages is 20 units of 50 ms, i.e. 1sec.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.0.8802.17.1.1.1.1.1.1.6 snmpwalk -v2c -c public <target> IEEE-802DOT17-RPR-MIB::rprIfProtectionSlowTimer
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.0.8802.17.1.1.1.1.1.1.6.1 snmpget -v2c -c public <target> IEEE-802DOT17-RPR-MIB::rprIfProtectionSlowTimer.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.0.8802.17.1.1.1.1.1.1.6.1 i <value>
Start monitoring Vendor-neutral IEEE 802.17 standard (Resilient Packet Ring switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IEEE-802DOT17-RPR-MIB::rprIfProtectionSlowTimer OID value, configure state conditions and alerts, and monitor any Vendor-neutral IEEE 802.17 standard (Resilient Packet Ring switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (3 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.0 | std | START-MIB |
| 1.0.8802 | iso8802 | START-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.0.8802.17.1.1 | ieee802dot17rprMIB | IEEE-802DOT17-RPR-MIB |
| 1.0.8802.17.1.1.1 | rprObjects | IEEE-802DOT17-RPR-MIB |
| 1.0.8802.17.1.1.1.1 | rprGeneral | IEEE-802DOT17-RPR-MIB |
| 1.0.8802.17.1.1.1.1.1 | rprIfTable | IEEE-802DOT17-RPR-MIB |
| 1.0.8802.17.1.1.1.1.1.1 | rprIfEntry | IEEE-802DOT17-RPR-MIB |
| 1.0.8802.17.1.1.1.1.1.1.6 | rprIfProtectionSlowTimer | IEEE-802DOT17-RPR-MIB |