All MIBs › ICT-SINE-WAVE-INVERTER-MIB › inverterStatus
inverterStatus
Module: ICT-SINE-WAVE-INVERTER-MIB
OID (symbolic): ICT-SINE-WAVE-INVERTER-MIB::inverterStatus
OID (numeric): 1.3.6.1.4.1.39145.12.9
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Inverter Output Status ('1' indicates the Inverter Output is ENABLED, and '2' indicates the Inverter Output is DISABLED)
What is inverterStatus?
This read-only INTEGER reports whether the inverter's output is enabled(1) or disabled(2). Admins poll this to confirm the inverter is actively supplying power versus sitting idle, for example after a fault or manual shutdown. Seeing disabled(2) here alongside an active alarm would tell an admin the inverter shut its output down in response to a fault condition.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.39145.12.9 snmpwalk -v2c -c public <target> ICT-SINE-WAVE-INVERTER-MIB::inverterStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.39145.12.9.1 snmpget -v2c -c public <target> ICT-SINE-WAVE-INVERTER-MIB::inverterStatus.1
Start monitoring ICT sine-wave power inverter / backup power system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the ICT-SINE-WAVE-INVERTER-MIB::inverterStatus OID value, configure state conditions and alerts, and monitor any ICT sine-wave power inverter / backup power system from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.39145 | ictPower | ICT-DIGITAL-SERIES-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.39145.12 | inverter | ICT-SINE-WAVE-INVERTER-MIB |
| 1.3.6.1.4.1.39145.12.9 | inverterStatus | ICT-SINE-WAVE-INVERTER-MIB |