IBM-ELAN-MIB :: lecsValidateBestEffortPcr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › IBM-ELAN-MIB › lecsValidateBestEffortPcr

lecsValidateBestEffortPcr

Module: IBM-ELAN-MIB

OID (symbolic): IBM-ELAN-MIB::lecsValidateBestEffortPcr

OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: When false, Best Effort Configuration Direct VCCs will be accepted without regard to the signalled forward Peak Cell Rate (PCR). When true, Best Effort VCCs will be rejected if the signalled forward PCR exceeds the line speed of the LECS ATM device. Calls will not be rejected due to the backward PCR. The signalled backward PCR will be honored if it does not exceed the line rate; otherwise, transmissions to the caller will be at line rate.

What is lecsValidateBestEffortPcr?

This TruthValue flag controls whether the LECS enforces the signalled forward Peak Cell Rate (PCR) on Best Effort Configuration Direct VCCs against the line speed of its ATM device. When true, calls whose forward PCR exceeds the device's line rate are rejected, while backward PCR overshoot is instead clamped to line rate rather than causing rejection. An admin would enable this (true) to prevent oversubscribed best-effort VCC requests from being accepted onto an already-saturated ATM interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4
snmpwalk -v2c -c public <target> IBM-ELAN-MIB::lecsValidateBestEffortPcr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4.1
snmpget -v2c -c public <target> IBM-ELAN-MIB::lecsValidateBestEffortPcr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4.1 s <value>

Start monitoring IBM ATM LAN Emulation switch/server (LES/LECS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-ELAN-MIB::lecsValidateBestEffortPcr OID value, configure state conditions and alerts, and monitor any IBM ATM LAN Emulation switch/server (LES/LECS) from a single console.

OID Breakdown

Upper-level ancestors (12 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2ibmATM-ADAPTER-MIB
1.3.6.1.4.1.2.6ibmProdATM-ADAPTER-MIB
1.3.6.1.4.1.2.6.118nwaysMSSFECLIENT827x-MIB
1.3.6.1.4.1.2.6.118.1mssCommonNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2mssCmnSrvrsNWAYSMSS-MIB
1.3.6.1.4.1.2.6.118.1.2.1mssServerLanENWAYSMSS-MIB
Numeric OIDNameModule
1.3.6.1.4.1.2.6.118.1.2.1.4ibmElanMIBIBM-ELAN-MIB
1.3.6.1.4.1.2.6.118.1.2.1.4.3ibmElanLecsGroupIBM-ELAN-MIB
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1ibmElanLecsConfGroupIBM-ELAN-MIB
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1ibmLecsConfTableIBM-ELAN-MIB
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1ibmLecsConfEntryIBM-ELAN-MIB
1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.4lecsValidateBestEffortPcrIBM-ELAN-MIB