All MIBs › IBM-ELAN-MIB › configDirectMaxReservedBw
configDirectMaxReservedBw
Module: IBM-ELAN-MIB
OID (symbolic): IBM-ELAN-MIB::configDirectMaxReservedBw
OID (numeric): 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: Defines the maximum acceptable Sustained Cell Rate (SCR) for a Configuration Direct VCC; if SCR is not specified on the incoming call, then this parameter defines the maximum acceptable Peak Cell Rate (PCR) for a Configuration Direct VCC with reserved bandwidth. This parameter is applied to both forward and backward directions. Calls received with Traffic Parameters specifying higher rates will be released. If SCR is specified on the incoming call, the call will not be rejected due to the PCR or Maximum Burst Size. The constraint imposed by this parameter is not applicable to BEST EFFORT connections.
What is configDirectMaxReservedBw?
This object, ranging 0 to 155000, sets the maximum acceptable cell rate (Sustained Cell Rate if specified, otherwise Peak Cell Rate) for a Configuration Direct VCC carrying reserved bandwidth traffic to the LECS. Calls whose traffic parameters exceed this bound are released by the LECS, while it does not constrain Best Effort connections at all. An admin on an OC-3 (155 Mbps) ATM uplink might leave this at the 155000 (cells/sec-equivalent Kbps) ceiling, or lower it to reserve headroom for other reserved-bandwidth services sharing the link.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5 snmpwalk -v2c -c public <target> IBM-ELAN-MIB::configDirectMaxReservedBw
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5.1 snmpget -v2c -c public <target> IBM-ELAN-MIB::configDirectMaxReservedBw.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5.1 i <value>
Start monitoring IBM ATM LAN Emulation switch/server (LES/LECS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the IBM-ELAN-MIB::configDirectMaxReservedBw OID value, configure state conditions and alerts, and monitor any IBM ATM LAN Emulation switch/server (LES/LECS) from a single console.
OID Breakdown
Upper-level ancestors (12 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2 | ibm | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6 | ibmProd | ATM-ADAPTER-MIB |
| 1.3.6.1.4.1.2.6.118 | nwaysMSS | FECLIENT827x-MIB |
| 1.3.6.1.4.1.2.6.118.1 | mssCommon | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2 | mssCmnSrvrs | NWAYSMSS-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1 | mssServerLanE | NWAYSMSS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2.6.118.1.2.1.4 | ibmElanMIB | IBM-ELAN-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3 | ibmElanLecsGroup | IBM-ELAN-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1 | ibmElanLecsConfGroup | IBM-ELAN-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1 | ibmLecsConfTable | IBM-ELAN-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1 | ibmLecsConfEntry | IBM-ELAN-MIB |
| 1.3.6.1.4.1.2.6.118.1.2.1.4.3.1.1.1.5 | configDirectMaxReservedBw | IBM-ELAN-MIB |